Masterpage:Left-FullCol
76
EN
Filename [VS30U_4-EN.fm]
Page 76 February 1, 2002 1:20 pm
SUBSIDIARY SETTINGS (cont.)
DV MODE SET
* The default setting is bold in the table below.
8
SOUND MODE
12BIT
16BIT
Select the appropriate mode before recording on a Mini DV tape.
12BIT
: Enables Audio Dubbing later.
16BIT
: Audio Dubbing is impossible but the recorded sound quality is
higher than “12BIT”.
8
12BIT MODE
SOUND1
SOUND2
FULL
Select the appropriate mode when playing back an audio-dubbed Mini DV tape.
SOUND1
: Original recorded sound
SOUND2
: Audio-dubbed sound
FULL
: Original recorded sound and Audio-dubbed sound
NOTES:
● When “12BIT MODE” is set to “FULL”, both the main and sub audio will be audible.
● To select only the main audio or only the sub audio of bilingual tapes, set “12BIT MODE”
to “SOUND1”.
8
TIME CODE
ON
OFF
When this function is set to “ON”, the time code always appears on the TV screen
while the DV deck is being selected.
When this function is set to “OFF”, the time code appears on the TV screen only by
pressing – –:– –. (
墌
pg. 11, 41)
VS30U_4-EN.fm Page 76 Friday, February 1, 2002 1:20 PM
To Next Page
Loading...
Need help?
General
