K-TRON K-Commander User Manual

805.8
K-Commander Loss-in-Weight Programming
Rev: G Produced by the K-Tron Institute
Editing Variables, Continued
Loss of
programming
data
If the battery on the K10S LWF controller fails, your entered
programming data will be lost. This condition is generally indicated by
looking at the variable labeled Full Scale Setpoint on page Mcn.07. It
will be 0 if data has been lost. To re-enter data, go to the prior
procedure entitled "Order of Data Entry".
It is recommended that you retain a hard copy printout of the
programming data for each machine and its pages, plus the Line and
System pages. You can use the K-Cdr print function to help you.
If power is left off the system for 3 weeks or more, it is possible that
your entered programming data will be lost due to the battery being
discharged. If this is a problem, see your maintenance department for
resolution.

K-TRON K-Commander Specifications

General

Brand	K-TRON
Model	K-Commander
Category	Control Panel
Language	English