805.38
K-Commander Loss-in-Weight Programming
Rev: G Produced by the K-Tron Institute
LWF Page 04: Alarm Limits
Introduction:
Page 04
The page 04 for the loss-in-weight feeder holds the information
regarding alarm limit functions. Use the Scroll keys to move from page
to page.
Page 04 layout
This diagram shows the data layout. The second row of keys pop up
when the Edit key is pressed and a variable is highlighted.
Edit
Mode
F5 F6 F7 F8F1 F2 F3
F4
POWDER LWF : Alarm Limits M01.04
MASSFLOW (-) ALARM LIMIT 10 %
MASSFLOW (+) ALARM LIMIT 10 %
DRIVE COMMAND HIGH LIMIT 100 %
DRIVE COMMAND LOW LIMIT 0 %
ALARM DELAY SETTING 30 sec
START-UP DELAY SETTING 60 sec
CLEAR ALARMS ON STOPS Enabled
NET WEIGHT LOW LIMIT 2.000 %
Grav
Mode
Vol
Mode
F5 F6 F7 F8
Change
Value
<ESC>
Continued on next page
To Next Page
Loading...