Kaba E-Plex 5700 - Deleting a Door Group

Using the E-Plex Advanced ACS Software
E-Plex Advanced ACS User’s Guide
PKG 3114 0106 3–11
7. Click OK again. The software displays the edited door group in the Manage Door
Groups window.
Note: You should update your locks to reflect modified door groups by programming
the M-Unit and uploading the information to the locks. For more information, refer to M-
Unit Handheld PDA in Chapter 5,
Programming and Auditing Locks.
Deleting a Door Group
Complete the following steps to delete a door group.
1. From the Manage Door Groups window, select a door group to delete by clicking it.
2. Click Delete. If a door is associated with the door group, the software displays the Doors
Affected window, which displays all doors associated with the door group and prompts
you for confirmation.
3. Click No or Yes to confirm.
If you click No, the software returns to the Manage Door Groups window and the door
group is not deleted.