Using the E-Plex Advanced ACS Software
3–48 PKG 3114 0106
E-Plex Advanced ACS User’s Guide
M-Unit User
The M-Unit User is unique in that he or she does not have actual access to any door/lock,
but can only program or audit locks using the M-Unit Palm PDA any time of the day.
27. When you have completed the fields of the Assign Access Schedules and Privileges
window, click Save. The software returns to the Assign Users to Door for Access
window.
28. Assign Access Schedules and Privileges to any other assigned users. When you are
finished, click Save. The software returns to the Manage Access Assignment window.
29. Repeat steps 1–28 to administer additional doors.
30. Click Save. The software saves the information and closes the Manage Access
Assignment window.
Programming Locks
As soon as any door in the system has been updated with new data, the Program Locks
icon becomes active (“lights up”) to indicate the need to HotSync and upload new/changed
data to a door/lock. If data have been prepared, it should be transferred (HotSynced) to the
M-Unit so it can then be used to program the lock(s). The E-Plex Advanced ACS software
allows you to program locks from the Program menu or its equivalent Program icon.
To program locks, from the Program menu, select Program Lock, or click the Upload files
are waiting to be created button.
To Next Page
Loading...
