Kaba PowerLever 1550 - Page 9

Document Number 481.093 Rev. A - 06/04
5
Parts Check
Item Description
7
7A Chassis assembly for levers using conventional (non-interchangeable) key cylinder
7B Chassis assembly for levers using interchangeable key core
8 Inside case assembly
9
9A Inside backing plate/Electronics assembly - Model 1550
9B Inside backing plate/Electronics assembly - Model 45xx
9B Inside backing plate/Electronics assembly - Model 9000
10 Latchbolt assemblies
10A • 9/16” (14.3mm) throw dead locking latchbolt
11 Strikes
11A • 2 3/4” (70mm) T-strike (strike box included)
OR
11B • 4 7/8” (124mm) ASA-strike (strike box not included)
12 Strike Boxes
12A • Strike box for 2 3/4” (70mm) T-strike (included with strike; refer to 11A)
12B • Strike box for 4 7/8” (124mm) ASA strike (order separately)