3
/32"
(2 mm)
T
CAUTION
Apply template and drill
from the inside but
compensate for door
bevel if any
1
( 3 m m ) d i a .
3
( 1 9 m m ) d e e p
H
2
3
/8"
(
60 mm)
FOR DOORS OPENING OUTWARD,
PLACE THIS FOLD LINE IN LINE WITH FACE OF DOOR JAMB
BE SURE THE FOLD IS EXACTLY ON THE LINE
PKG1294 0307
NOTE: Lock will accomodate doors
1
3
/8" (35 mm) to 2
1
/4" (57 mm) thick.
Suitable reinforcement shall be provided
by the hollow metal door manufacturer
to prevent collapsing of door. When
door silencers are to be installed,
proper allowances must be made for
strike location.
MARK ACCURATELY
BORE STRAIGHT
Place this template on the
INTERIOR SIDE OF THE DOOR
using the correct fold line for
door edge for door opening
inward or outward.
LEFT HAND DOOR
7106
TEMPLATE
To Next Page
Loading...
Need help?
General