KAESER ASK 40 User Manual

Fig. 17 Using the remote control for switching on and off
1 «Remote control» key
2 Remote control LED
1. Attach an easily seen notice to the machine that warns of remote operation.
Remote control: Risk of injury caused by unexpected starting!
➤ Make sure that the power supply disconnecting device is switched off before commencing any
work on the machine.
Tab. 52 Machine identification
2. Label the starting device in the remote control centre as follows:
Remote control: Risk of injury caused by unexpected starting!
➤ Before starting, make sure that no one is working on the machine and that it can be safely
started.
Tab. 53 Remote control identification
3. Press the «remote control» key.
The remote control LED lights. The machine can be remotely controlled.
8.4 Using the timer for switching on and off
Precondition The timer is programmed.
8 Operation
8.4 Using the timer for switching on and off
54
Operating Manual Screw Compressor
ASK 901824 12 E

KAESER ASK 40 Specifications

General

Model	ASK 40
Category	Rotary Screw Compressor
Motor Power	22 kW
Noise Level	68 dB(A)
Type	Rotary Screw