Bladder Volume Tester User’s Manual V1.02
- 16 -
The data file is saved in the “123” (patient ID) folder of U disk, which is saved at 9:34:21
on March 12, 2014.
U:\USER\4A12948B.BMP (not enter ID)
If not enter patient ID, the data file is saved in the “USER” folder of U disk, which is
saved at 9:48:22 on October 12, 2014.
9.5 Thermal print
Touch『 』key to print out the results through the thermal printer.
Attention:
1. Turn on the machine and then insert U disk.
2. Operating U disk should allow sufficient storage time to prevent the files are missing.
3. U disk storage should be concerned about the free space to prevent the invalid storage.
4. When saving the data file or images, the system time stops until the store of data or images is
complete, the system time will automatically return to normal.
Attention:
If there is no thermal paper, please replace the thermal paper.
To Next Page
Loading...
