3Kamstrup A/S • 55122714_A2_GB_04_2021
flowIQ® Gateway
Contents
1 Symbols used in this document 5
1.1 Warnings in the document 5
2 Abbreviations 7
3 Technical data 7
3.1 Product introduction 7
3.2 Electrical data 8
3.3 Mechanical data 8
3.4 Material 8
3.5 Communication 9
3.6 Input 9
3.7 Connections and inputs 9
3.7.1 Primary connection terminals 9
3.7.1.1 Supported flowIQ® meters 10
3.7.1.2 Supported data from flowIQ® 2200/3200 meters 10
3.7.1.3 Supported info codes from flowIQ® 2200/3200 meters 10
3.7.2 Module slot 1 and 2 10
3.7.2.1 Supported communication modules 11
4 Before you begin 12
4.1 What is in the box? 12
4.2 Accessories (ordered separately) 12
4.3 Deployment summary 12
5 Before field deployment 13
5.1 Import flowIQ® Gateway in meter data management systems 13
5.1.1 Automatic import in READy Manager 13
5.1.2 Manual import in READy Manager 13
5.1.3 Import in a third-party MDM system 13
6 Field deployment - installation 14
6.1 Installation 14
6.1.1 Wall installation 14
6.2 Connecting flowIQ® Gateway with flowIQ® 2200/3200 meter 15
6.3 Plugging in communication module(s) 16
6.3.1 Antenna mounting 16
6.4 Connecting additional accessories 17
6.4.1 Connecting Pt500 temperature sensors 17
6.4.2 Connecting pulse meters 18
6.4.3 Connecting Analog input 4…20 mA devices 18
6.5 Connecting the power supply 19
6.5.1 Battery supply 19
6.5.2 Mains supply 19
7 Field deployment – Configuration 21
7.1 Configuration of flowIQ® Gateway 21
7.1.1 Display loops 23
7.1.1.1 "USER loop" 23
7.1.1.2 "SETUP loop" 25
7.1.1.3 Overview of the "SETUP loop" index 26
7.1.1.4 "TECH loop" 26
7.1.2 Activation and deactivation of radio 27
7.2 Configuration of communication module(s) 27
7.2.1 Pulse configuration 28
7.2.1.1 Pulse In-A and In-B 28
7.2.1.2 Pulse cold water leakage 28
7.2.1.3 Pulse output 28
To Next Page
Loading...
