CAN RANGER OPERATION
29
functions are operated for
more than 1 minute. If
Disabled, only the ENABLE
button needs pressing to
activate joystick functions.
The default is Enabled.
Next the START ERROR setup
screen will appear:
START ERROR ENB
Use ↑ or ↓ to toggle between
ENABLE or DISABLE for the
Engine Start error code.
When Enabled, the receiver’s
red LED will blink an error if it
detects a problem with the
Engine Start output. When
Disabled, the receiver’s red
LED will not blink an error if it
detects a problem with the
Engine Start output.
Next the STOP ERROR setup
screen will appear:
STOP ERROR ENB
Use ↑ or ↓ to toggle between
ENABLE or DISABLE for the
Engine Stop error code.
When Enabled, the receiver’s
red LED will blink an error if it
detects a problem with the
Engine Stop output. When
Disabled, the receiver’s red
LED will not blink an error if it
detects a problem with the
Engine Stop output.
Next the HORN ERROR setup
screen will appear:
HORN ERROR ENB
Use ↑ or ↓ to toggle between
ENABLE or DISABLE for the
Horn error code. When
Enabled, the receiver’s red
LED will blink an error if it
detects a problem with the
Horn output. When Disabled,
the receiver’s red LED will not
blink an error if it detects a
problem with the Horn output.
Finally you will then have the
To Next Page
Loading...
