English 5.906-591.0 Rev. 00 (01/14) 11
1 Screws
2Chassis
Unscrew the screws.
Note
Use special tools.
1 Cover
2 Engine mount
3 Lever appliance switch
4 Rubber guiding device mains cable
5 Mains cable
6Chassis
Remove the appliance cover.
Unhook the rubber guiding device of the mains cable.
Installation information
Pay attention to the correct fitting position during reinstal-
lation.
1 Engine mount
2 Lever appliance switch
3 Rubber guiding device mains cable
4 Retainer lever appliance switch
5 Retainer engine mount
040 Service activities
ABGH Uninstall / install appliance hood
Torques Nm
Screws 1,2...1,9
To Next Page
Loading...
