EasyManua.ls Logo

KDK 30BGCH - Maintenance 25; Antibacterial Function

KDK 30BGCH
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
MAINTENANCE
.
時間復位(長按模式按鈕3聽到“”的一聲
位完成)
Press and hold the MODE button at the eceiving
part of the unit body for 3 seconds.
A “beep” means the filter cleaning indication
is cleared. (The accumulated time of the filter
cleaning indication will be reset, and the time
will be accumulated again.)
Clear the filter cleaning indication at the receiving part of the main body.
Each time cleaning the filter , you are advised to reset the accumulated time of the filter
cleaning indication. (Press and hold the MODE button for 3 seconds. A “beep” sound means
the resetting is done.)
長按機體接收部模式按鈕3
聽到“”的一聲過濾網清潔提示將被解除(過濾網
清潔指示的累計時間將重新累計)
The filter mesh in the filter mesh assembly provides the antibacterial function, with
the antibacterial ratio against staphylococcus aureus and the antibacterial ratio
against colibacillus up to 99.9 % respectively (test basis: JIS Z2801:2000).
After using for a period of time, the colour of the filter mesh will change from yellow
to brown, but the changing material colour will not affect performance.
As the use time increases, the antibacterial performance of the filter mesh will
decrease accordingly.
99.9 %
99.9 % JIS Z 28012010
使
使
ANTIBACTERIAL FUNCTION

Related product manuals