KEB COMBIVERT F5 Series - Preface; Signal Words and Safety Symbols

3
Table of Contents
Table of Contents
1. General ............................................4
1.1 Product description ............................ 4
1.2 Safety Precautions ............................ 5
1.3 Part number system .......................... 6
1.4 Mounting instructions ......................... 7
1.4.1 Classification............................... 7
1.4.2 Physical Mounting ....................... 7
1.4.3 Harsh Environments ................... 7
1.4.4 Ambient Conditions..................... 8
1.4.5 Cooling systems ......................... 8
1.5 Electrical connections ........................ 9
1.5.1 Safety First.................................. 9
1.5.2 Voltage Supply ............................ 9
1.5.3 Disconnect Switch ...................... 9
1.5.4 Fusing ....................................... 10
1.5.5 Line Chokes .............................. 10
1.5.6 Motor Thermal Protection ......... 11
1.5.7 High Voltage Connections ........ 11
1.5.8 DC Supply Connections ............ 12
1.5.9 Ground Connections ................. 12
1.5.10High Frequency Shielding ......... 13
1.5.11Example shield connections ..... 14
1.5.12Example Control Cabinet
Layout ....................................... 14
2. Technical Data...............................15
2.1 Technical Data 230V Class.............15
2.2 Technical Data 460V Class.................17
2.3 Dimensions and Weight.............21
2.4 Survey of Power Circuit Terminals.......22
2.5 Connection of Power Circuit.......24
3. Accessories...................................26
3.1 Braking Resistor.............................26
3.1.1 Selection of the Braking
Resistor..................................... 26
3.1.2 Panel Mount Brake Resistors ... 28
3.1.3 Parallel Connection of Braking
Resistors ................................... 30
3.1.4 Back Mount Braking Resistor.... 31
3.2 Input Filters........................................33
3.2.1 Line Choke................................ 33
3.2.2 EMI (CE) - Filter ........................ 36
3.3 Output Filters.....................................39
3.3.1 Motor Choke ............................. 39
3.3.2 PWM to Sine Filter .................... 42
3.3.3 PWM to Sine Filter Plus ............ 42
4. Annex .............................................4 3
4.1 Overload Characteristic.......................43
4.2 Overload protection in the lower speed
range................................43