KEB COMBIVERT F5 Series - 1 General; Product Description

4
1. General
1.1 Product description
In selecting the COMBIVERT F5 series inverter, you have chosen a
frequency inverter with the highest quality and dynamic performance.
It is exclusively designed for smooth speed regulation of a three
phase motor.
The operation of other electrical loads is forbidden and can lead to
destruction of the unit.
This manual describes the frequency inverter COMBIVERT F5.
- 1 hp...60 hp / 230V class
- 1 hp...200hp / 460V class
Note: 250hp to 450hp units, sizes 28 - 31 are described in a
supplemental manual 00.F4.0UZ-KW01. For technical data
and wiring connections of these sizes please consult this
document.
The COMBIVERT F5 inverter has the following features:
- small mounting footprint
- IGBT power circuit gives low switching losses
- low motor noise with high carrier frequency
- extensive protection for over- current, voltage and temperature
- voltage and current monitoring in static and dynamic operation
- short circuit proof and ground-fault proof
- noise immunity in accordance with IEC1000
- hardware current regulation
- integrated cooling fan
- uniform mounting pattern
- can be mounted side by side with zero clearance
- CE compliant and UL listed
General