KEB COMBIVERT F5 BASIC

Need help?

Do you have a question about the KEB COMBIVERT F5 BASIC and is the answer not in the manual?

Summary

1. Introduction

1.1 General

Provides an overview of the general contents of the chapter.

2. Summary

2.1 Product Description

Details the features, function principle, and application guidelines of the KEB COMBIVERT.

3. Hardware

3.1 Control Units

Describes the control cards F5-BASIC and F5-GENERAL, their survey, and terminal configurations.

4. Operation

4.1 Fundamentals

Explains software structure, operating modes (Customer, Application, Drive), parameters, and parameter groups.

5. Parameter

5.1 Parameter

Details parameter groups, control card types (F5-BASIC, F5-GENERAL), and provides a parameter listing.

6. Functions

6.1 Operating and Applicance Date

Covers overview of ru-, In-, Sy-parameters, and explanations of parameter descriptions.

7. Start-up

7.1 Preparatory Measures

Covers measures after unpacking, installation, connection, and a pre-switch-on checklist.

9. Error Assistance

9.1 Troubleshooting

Provides general guidance on error handling and troubleshooting, including error messages and their causes.

10. Project Planning

10.1 General Design

Assists in planning applications, covering control cabinet design, braking resistors, and cable/fuse selection.

11. Networks

11.1 Network Components

Details hardware components for integrating the inverter into networks (RS232, HSP5, Profibus, InterBus, CANopen, Sercos).

12. Annex

12.1 Search and Find

Provides an index of terms and lists worldwide and domestic representations for KEB.