KEB COMBIVERT F5 BASIC - 6.1 Operating and Applicance Date

6
11
24.06.02
Name: Basis
KEB COMBIVERT F5-G / B
Chapter Section PageDate
© KEB Antriebstechnik, 2002
All rights reserved
Functional DescriptionOperating and Appliance Data
1. Introduction
2. Summary
3. Hardware
4. Operation
5. Parameter
6. Functions
7. Start-up
8. Special Operation
9. Error Assistance
10. Project Planning
11. Networks
12. Annex
6.1 Operating and Applicance
Date
6.2 Analog In- and Outputs
6.3 Digital In- and Outputs
6.4 Set Value and Ramp
Adjustment
6.5 Voltage-/Frequency
Characteristic (U/f)
Adjustment
6.6 Motor Data Adjustment
6.7 Protective Functions
6.8 Parameter Sets
6.9 Special Functions
6.10 Encoder Interface
6.11 SMM
6.12 Technology Control
6.13 CP-Parameter Definition
6.1.1 Overview of the
ru-Parameters ......................... 3
6.1.2 Overview of the
In-Parameters ......................... 4
6.1.3 Overview of the
Sy-Parameters ........................ 4
6.1.4 Explanation to Parameter
Description ............................. 5
6.1.5 Description of the
ru-Parameters ......................... 6
6.1.6 Description of the
In-Parameters ....................... 17
6.1.7 Description of the
Sy-Parameters ...................... 21