25
12. Fastening bolts and nuts: front and rear shock absorbers, flat fork axles, front and rear wheel axles, engine suspension, steering system, steering
handles, front and rear brakes, clutches, rear suspension systems, electrical components, etc.
5.3 Start of motorcycle
（Fig.11）
1、Turn on the ignition switch lock, turn off the preset switch to this sign“ ”.
2、Change the gear to low gear or neutral.
3、Fully grasp the clutch handle with your left hand (disengage the clutch when it is not in neutral).
4、Press the electric start button“ ”，If necessary, turn the throttle handle at the same time to refuel properly to start the engine.
Warning:
Failure to conduct inspections and proper maintenance before riding will leave a safety hazard to riding, and checking and repairing the
motorcycle before riding can eliminate safety hazards.
To Next Page
Loading...
