KEEWAY RK V125 C - Shift Operation

28
EN
5.4. Motorcycle driving
5.4.1. Shift operation (Figure 12, Figure 13)
Fig. 12 Shift position diagram
Fig.13 Gear Lever
This vehicle has six gears with constant meshing; gears ① and ② are low speeds, gears
③ and ④ are medium speeds, and gears ⑤ and ⑥ are high speeds. Refer to the
following operations for gear shifting:
1) Neutral gear shift ①: Return the throttle with your right hand, quickly grasp the clutch
handle with your left hand, step on the shift lever with your left foot once to make the
transmission enter ① gear, gradually release the clutch handle with your left hand, and
gradually increase the throttle with your right hand. The coordinated action makes the
motorcycle run in the first gear steadily.
2) ①Gear shift ②Gear: return the throttle with your right hand, quickly grasp the clutch
handle with your left hand, hook up the shift lever with your left foot once to make the
transmission enter the ② gear, gradually release the clutch handle with your left hand,
and gradually increase the throttle with your right hand. The coordinated action makes
the motorcycle run smoothly in the second gear.
3) ②The method of shifting ③, ④, ⑤, ⑥ is the same as ① shifting ②.
4) The method of lowering the gear is the same as the method of shifting in neutral ①.