Note：
1、After starting, warm up for 2-3 minutes before driving on the road. Engines with insufficient preheating temperature will aggravate
the wear of cylinders, piston rings, rocker arms and other parts during driving.
2.When using the electric start button “ ”，it should be released immediately within 3 to 5 seconds each time it runs; Otherwise, it
will easily cause the battery to discharge too quickly and affect the battery's service life.
3.After the engine is started, the electric start button “ ”；should be released immediately; while the engine is running, it is not
allowed to press the electric start button“ ”，otherwise the engine will be easily damaged.
4. Ensure that the single support is completely stowed to avoid obstruction of driving and control failure when turning left.
5. After starting or driving, please refuel stably (turn the throttle handle).
6. Do not start the motorcycle in a small space to avoid the risk of poisoning due to the exhaust gas that is not easily diffused.
7. If the clutch switch fails, it should be replaced in time.
8. It is strictly forbidden to start the engine without disengaging the clutch, otherwise it will cause damage to parts or safety accidents.
9. Do not start the motorcycle when there is lack of fuel or engine oil.
To Next Page
Loading...
Need help?
General
