KEEWAY RK V125 C - Ignition Switch Lock

16
EN
Note: When the upper button is pressed once, the total and subtotal of the mileage will be switched. When in the subtotal state, long-time presses
the button to clear the subtotal mileage.
Long press the up button to enter the clock setting mode. At this time, press the up button once to switch the clock to adjust the position.
Press the button once to adjust the time.
4.3. Ignition switch
The ignition switch lock (Figure 5) is set in front of the steering handle, and the ignition switch must be turned on before starting the motorcycle.
The key position and function are shown in Table 2.
10
Water temperature alarm
indication
Lights up and displays red: the coolant is overheated, and the cooling system is
faulty
11
Marker light indication
Front position lamp, instrument panel lighting lamp, rear position lamp light up
12
Time indicator
Display current Beijing time
Key position
Function
Key state
OFF“ ”
The circuit is disconnected and the engine cannot be
started
Can be unplugged
ON“ ”
The circuit is closed and the engine can be started
Not unplugged
steering lock “ ”
The circuit is disconnected and the steering
mechanism is locked
Can be unplugged
Table.2