47
●Measure the free stroke of the front brake handle: 5～10mm.
●Measure the thickness of the front brake disc and brake friction lining.
●Check the oil level in the oil cup; check whether the brake caliper is normal;
check the brake oil pipe and
There is no oil leakage or cracks in the brake oil cup; check the wear of the
brake disc.
●When operating the brake handle, if you feel that the handle pressure is
insufficient, then there is air in the brake system; the air in the brake system
should be completely discharged before normal use; otherwise it will reduce
the braking performance or brake failure. This work should be completed at the
designated dealership.
Note:
The brake is an extremely important component to ensure the personal safety of the rider, and the brake should be checked and
adjusted frequently.
Replace with a new brake disc or brake friction pad, and do not drive immediately; you should first manipulate (hold and release) the
front brake handle several times until the brake disc and the brake caliper mesh well.
To Next Page
Loading...
Need help?
General
