50
Figure 26 Front brake fluid level check
8.2. Check the brake pads of the front brake
8.3. Check the brake fluid level of the front brake system
Adjust the placement posture of the vehicle so that the brake fluid in the brake fluid is in
a horizontal position, and check the brake fluid level through the fluid level window. (Figure 26)
When the brake fluid level is below the scale line: please replenish the brake fluid in time.
Warning:
If the brake fluid level is lower than the scale line, it means that the brake system is not sealed, or the brake friction lining has been
completely worn. Check the braking system and do not continue driving. Please go to the designated after-sales point for repairs.
If the brake fluid is used for too long, the braking effect will be reduced. Please replace the brake fluid in time.
Note:
The friction lining will gradually wear out during the braking process of the vehicle. The
braking effect will gradually decrease. To ensure the safety of you and the vehicle, please
check it frequently and replace it in time. If you do not understand the specifications of the
friction plate or cannot replace it by yourself, please go to the designated after-sales point for
repair.
Check the minimum thickness of the brake pads (A).
The minimum thickness of the brake friction pad: A=1.5mm.
If the thickness is lower than the minimum thickness: please replace the friction plate in time.
If the friction plate is found to be damaged or cracked: please replace the friction plate in time.
To Next Page
Loading...
Need help?
General
