appeNdiCes
31
QuNeo
Preset 5, 6, 7, & 8 (Grid Mode):
Presets 5-8 are the same except the Pad channels increment as the preset # increases.
These presets are in Grid Mode and don’t use banks. Rotaries are set to use Direction instead of Location. Pass
Thru Widths for the rotaries are set to 127. Velocity response is xed at 127 for all notes. All Pressure sources send
out continuous CC values.
Presets 9 (Ableton Live Clip Launching):
The QuNeo Ableton Live Remote Control Surface contains a variety of Modes. Modes remap the 8x8 Grid and
non Global Buttons into various functions for Ableton Live. Modes include Clip Launch, Step Sequencer, and Note
Mode. When the Ableton Live Remote Control Surface is loaded it initializes Mode 1 (M1 - Clip Launch Mode).
The image and corresponding text below summarizes Clip Launch Mode.
GLOBAL CONTROLS:
1. Transport Controls
2. Tempo
3. Metronome
4. MIDI Overdub
5. Track Navigation
6. Scene Navigation
7. Selected Track Send A
8. Selected Track Send B
9. Selected Track Pan
10. Selected Track Volume
11. Selected Clip Loop
12. Selected Clip Loop End
13. Volume Faders
14. Crossfader
To Next Page
Loading...
Need help?
General