appeNdiCes
32
QuNeo
M1. CLIP LAUNCH MODE Controls:
Clip Launch Mode represents an overview of the current Ableton Live Session. Clip Launch Mode enables the
QuNeo to launch clips within Ableton’s clip slots and control volume parameters assigned to the rst 4 volume
Sliders within Ableton’s highlighted red box. Other controls include: overdub - on/off, metronome - on/off, tempo
- up/down, and transport functionality including: play, stop, and record.
A1. CLIP LAUNCH - These Pads launch clips within Ableton’s clip slots.
A2. SCENE LAUNCH - Rows in the Session View are called scenes. All clips in a scene can be launched
simultaneously by clicking the corresponding SCENE LAUNCH button in the column. These buttons trigger a
row of clips within the session. A row is known as a “SCENE”. When triggered, all of the clips in the selected
scene will play.
A3. CLIP STOP - Push to stop the currently playing or recording clip corresponding to the correct track.
A4. STOP ALL CLIPS - Push to stop all playing and recording clips in the session.
A5. TRACK ACTIVATOR - Activate this button to hear the track, or deactivate it to mute the track.
A6. SOLO / CUE - Activate this button to solo the track, or deactivate it to unsolo the track.
A7. RECORD ARM - Active this button to Arm the track, or deactivate it to unarm the track.
A8. SELECTED CLIP LAUNCH - Push to launch the currently selected clip.
A9. BANK SELECT - These allow the user to move the highlighted 7 x 4 red box around the session LEFT/
RIGHT/UP/DOWN.
This image shows what MIDI data will output for each sensor in the “Ableton Live Clip Launching” preset. In
this preset the Pads use Grid Mode. This preset doesn’t use banks. Rotaries are set to use Direction instead of
Location. Velocity response is xed at 127 for all notes. All Pressure sources send out continuous CC values.
For more information about using the Ableton Live Template, read its Quickstart document in the QuNeo
directory: “Documentation/Template Quickstarts”.
To Next Page
Loading...
Need help?
General