Keithley 2000 Quick Start Guide

1-28 Return to Section Topics 2000-903-01 Rev. C / October 2007
Section 1: Introduction Model 2000 Digital Multimeter Quick Start Guide
Table 1-11
STATus command summary
Command Description
:STATus
:MEASurement
[:EVENt]?
:ENABle <NRf>
:ENABle?
:CONDition?
:OPERation
[:EVENt]?
:ENABle <NRf>
:ENABle?
:CONDition?
:QUEStionable
[:EVENt]?
:ENABle <NRf>
:ENABle?
:CONDition?
:PRESet
:QUEue
[:NEXT]?
:ENABle <list>
:ENABle?
:DISable <list>
:DISable?
:CLEar
Path to control measurement
event registers:
Read the event register.
Program the enable register.
Read the enable register.
Read the condition register.
Path to control operation status
registers:
Read the event register.
Program the enable register.
Read the enable register.
Read the condition register.
Path to control questionable
status registers:
Read the event register.
Program the enable register.
Read the enable register.
Read the condition register.
Return status registers to
default states.
Path to access error queue:
Read the most recent error
message.
Specify error and status
messages for queue.
Read the enabled messages.
Specify messages not to be
placed in queue.
Read the disabled messages.
Clears all messages from Error
Queue.

Keithley 2000 Specifications

General

Digits	6.5
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Resistance Range	100 Ω to 100 MΩ
Connectivity	IEEE-488 (GPIB)
Display Type	VFD