Model 2231A Triple-channel DC Power Supply Reference Manual Section 5: SCPI command reference
077100401/September 2014 5-5
*SAV
This command is to save the current setups of the power supply into specified memory. These setups contain current, voltage,
and the max voltage.
Item Description
Group System
Syntax *sav <NR1>
Arguments 0 to 30
Related Commands *RCL
*RCL
This command is to recall the setups you saved in the specified memory location.
Item Description
Group System
Syntax *RCL <NR1>
Arguments 0 to 30
Related Commands *SAV
*TST?
This command is to initialize a self-test and reports any errors.
Item Description
Group System
Syntax *TST
Returns A return value of 0 means the self-test passes; if there is an error, the
error code refers to Table 7
*WAI
This command is to prevent the instrument from executing further commands or queries until all pending
commands are complete.
Item Description
Group System
Syntax *WAI
Related Commands *TRG
To Next Page
Loading...
