Model 2231A Triple-channel DC Power Supply Reference Manual Section 5: SCPI command reference
077100401/September 2014 5-19
STATus subsystem
The STATus subsystem controls the status registers of the Model 2231A-30-3.
STATus:QUEStionable[:EVENt]?
This command is to return to the contents of the questionable event register. After this command executed, the
questionable event register is reset.
Item Description
Group Status
Syntax STATus:QUEStionable[:EVENt]?
Arguments None
Returns <NR1> is a decimal integer representation of the contents of the
questionable event register. Range: 0 to 255
Examples Stat:ques?
STATus:QUEStionable:ENABle
This command is to set and query the contents of the questionable event enable register, The QENR is an
eight-bit mask register that determines which bits in the questionable event register should affect the state of
QUES bit in the status byte register.
Item Description
Group Status
Syntax STATus:QUEStionable:ENABle <NR1>
STATus:QUEStionable:ENABle?
Arguments <NR1> is a decimal integer ranging from 0 to 255, according to
which bits of the mask register of the QENR are set.
Returns <mask>
Examples Stat:ques:enab?
STATus:QUEStionable:CONDition?
This command is to query the questionable condition register.
Item Description
Group Status
Syntax STATus:QUEStionable: CONDition?
Arguments None
To Next Page
Loading...
