Keithley 2231A-30-3 - MEASURE Subsystem Commands

Section 5: SCPI command reference Model 2231A Triple-channel DC Power Supply Reference Manual
5-12 077100401/September 2014
INSTrument:COMbine:TRACk
This command is to set CH1and CH2 in track mode.
Item Description
Group Channel
Syntax INSTrument:COMbine:TRACk
Arguments None
Returns None
Examples Inst:com:trac
INSTrument:COMbine:OFF
This command is to turn off series/parallel/tracking modes.
Item Description
Group Channel
Syntax INSTrument:COMbine:OFF
INSTrument:COMbine:OFF
Arguments None
Returns NONE/SERIES/PARALLEL/TRACK
Examples Inst:com:off
INSTrument:COUPle[:TRIGger]
This command is to determine which channels will respond to the trigger command.
Item Description
Group Channel
Syntax INSTrument:COUPle[:TRIGger] <Arguments>
INSTrument:COUPle[:TRIGger]? <Arguments>
Arguments CH1|CH2|CH3
Returns None
Examples Inst:coup ch1.ch2
MEASure subsystem
These commands make measurements.