Keithley 2231A-30-3 - Calibration:save; Calibration:initital; Calibrate:string; Display Subsystem

Model 2231A Triple-channel DC Power Supply Reference Manual Section 5: SCPI command reference
077100401/September 2014 5-9
CALibration:SAVe
This command is to save calibration coefficient into nonvolatile memory.
Item Description
Group Calibration
Syntax CALibration:SAVe
Arguments None
Returns None
Examples Cal:sav
CALibration:INITital
This command is to set the current calibration coefficient as the default value.
Item Description
Group Calibration
Syntax CALibration:INITital
Arguments None
Returns None
Examples Cal:init
CALibrate:STRing
This command is to write or query the calibration information of the instrument.
Item Description
Group Calibration
Syntax CALibration:STRing <string>
CALibrate:STRing?
Arguments char (22 character maximum)
Returns String
Examples Cal:str “march 2014”
DISPlay subsystem
This subsystem contains commands that control the front-panel display.
DISPlay[:WINDow][:STATe]