5: Introduction to TSP operation Series 2600B System SourceMeter® Instrument
5-14 2600BS-901-01 Rev. B / May 2013
Status model
The status model is a set of status registers and queues. You can use the following commands to
manipulate and monitor these registers and queues to view and control various instrument events.
status.condition (on page 7-254)
status.measurement.* (on page 7-256)
status.measurement.buffer_available.* (on page 7-258)
status.measurement.current_limit.* (on page 7-259)
status.measurement.instrument.* (on page 7-260)
status.measurement.instrument.smuX.* (on page 7-262)
status.measurement.reading_overflow.* (on page 7-264)
status.measurement.voltage_limit.* (on page 7-265)
status.node_enable (on page 7-266)
status.node_event (on page 7-268)
status.operation.* (on page 7-270)
status.operation.calibrating.* (on page 7-272)
status.operation.instrument.* (on page 7-273)
status.operation.instrument.digio.* (on page 7-275)
status.operation.instrument.digio.trigger_overrun.* (on page 7-276)
status.operation.instrument.lan.* (on page 7-278)
status.operation.instrument.lan.trigger_overrun.* (on page 7-280)
status.operation.instrument.smuX.* (on page 7-282)
status.operation.instrument.smuX.trigger_overrrun.* (on page 7-284)
status.operation.instrument.trigger_blender.* (on page 7-286)
status.operation.instrument.trigger_blender.trigger_overrun.* (on page 7-287)
status.operation.instrument.trigger_timer.* (on page 7-289)
status.operation.instrument.trigger_timer.trigger_overrun.* (on page 7-291)
status.operation.instrument.tsplink.* (on page 7-293)
status.operation.instrument.tsplink.trigger_overrun.* (on page 7-294)
status.operation.measuring.* (on page 7-296)
status.operation.remote.* (on page 7-297)
status.operation.sweeping.* (on page 7-298)
status.operation.trigger_overrun.* (on page 7-300)
status.operation.user.* (on page 7-302)
status.questionable.* (on page 7-304)
status.questionable.calibration.* (on page 7-306)
status.questionable.instrument.* (on page 7-307)
status.questionable.instrument.smuX.* (on page 7-308)
status.questionable.over_temperature.* (on page 7-310)
status.questionable.unstable_output.* (on page 7-312)
status.request_enable (on page 7-313)
status.request_event (on page 7-315)
status.reset() (on page 7-317)
status.standard.* (on page 7-317)
status.system.* (on page 7-319)
status.system2.* (on page 7-321)
status.system3.* (on page 7-323)
status.system4.* (on page 7-325)
status.system5.* (on page 7-327)
To Next Page
Loading...
