System SourceMeter® Instrument Reference Manual Section 6:
2600BS-901-01 Rev. B / May 2013 6-35
Password overview
Passwords can contain up to 255 characters.
If the password feature is enabled, a password is required to view and modify the following web
pages:
• IP configuration
• Set password
• TSB Embedded
• Reading buffers
• Flash upgrade
• TSP
®
Express
Complete the following steps to set the password.
1. From the web interface, click Set Password.
The LXI - Keithley Instruments - 2600B - Administration page is displayed.
2. In the "Current Password" field, type the existing password.
3. In the "New Password" field, type the new password.
4. Retype the new password in the "Confirm Password" field.
5. Click Submit.
The LXI Welcome page is displayed.
To Next Page
Loading...
