System SourceMeter® Instrument Reference Manual Section 5:
Introduction to TSP operation
2600BS-901-01 Rev. B / May 2013 5-17
smuX.trigger.source.set() (on page 7-251)
smuX.trigger.source.stimulus (on page 7-251)
smuX.trigger.SOURCE_COMPLETE_EVENT_ID (on page 7-253)
smuX.trigger.SWEEP_COMPLETE_EVENT_ID (on page 7-253)
smuX.trigger.SWEEPING_EVENT_ID (on page 7-253)
trigger.blender[N].clear() (on page 7-336)
trigger.blender[N].EVENT_ID (on page 7-337)
trigger.blender[N].orenable (on page 7-337)
trigger.blender[N].overrun (on page 7-338)
trigger.blender[N].reset() (on page 7-339)
trigger.blender[N].stimulus[M] (on page 7-339)
trigger.blender[N].wait() (on page 7-341)
trigger.clear() (on page 7-342)
trigger.EVENT_ID (on page 7-342)
trigger.generator[N].assert() (on page 7-343)
trigger.generator[N].EVENT_ID (on page 7-343)
trigger.timer[N].clear() (on page 7-344)
trigger.timer[N].count (on page 7-344)
trigger.timer[N].delay (on page 7-345)
trigger.timer[N].delaylist (on page 7-345)
trigger.timer[N].EVENT_ID (on page 7-346)
trigger.timer[N].overrun (on page 7-346)
trigger.timer[N].passthrough (on page 7-347)
trigger.timer[N].reset() (on page 7-348)
trigger.timer[N].stimulus (on page 7-348)
trigger.timer[N].wait() (on page 7-350)
trigger.wait() (on page 7-350)
tsplink.trigger[N].assert() (on page 7-356)
tsplink.trigger[N].clear() (on page 7-356)
tsplink.trigger[N].EVENT_ID (on page 7-357)
tsplink.trigger[N].mode (on page 7-358)
tsplink.trigger[N].overrun (on page 7-359)
tsplink.trigger[N].pulsewidth (on page 7-360)
tsplink.trigger[N].release() (on page 7-360)
tsplink.trigger[N].reset() (on page 7-361)
tsplink.trigger[N].stimulus (on page 7-362)
tsplink.trigger[N].wait() (on page 7-364)
To Next Page
Loading...
