4
Ohms Measurements
• Ohms configuration menu — Outlines the ohms configuration menu that allows
you to set up various ohms measurement aspects.
• Ohms measurement methods — Discusses auto and manual ohms measurement
methods and how to select them.
• Ohms sensing — Covers 2-wire and 4-wire ohms sensing.
• Offset-compensated ohms — Describes offset-compensated ohms, which can be
used to overcome the effects of offsets when making low-resistance measurements.
• Ohms source readback — Covers enabling and disabling ohms source readback.
• 6-wire ohms measurements — Describes the basic procedure for setting up the
SourceMeter for 6-wire ohms measurement, which can be used for measuring
resistor networks and hybrid circuits.
• Remote ohms programming — Summarizes the basic remote commands required
to program the SourceMeter for ohms measurements and gives several typical pro-
gramming examples.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
