BLIND HEMMaNG
Top thread tension
control 0 to 4
Stitch length
24 to 8
Stitch width
2to 3
Stitch selector
Presser foot
©
io
Fig. 1
Finish edge of hem anyway you
desire. Turn up hem appropriate
width, (Fig. 1)
Presser
Foot
Fig 3
3, Place garment under presser foot in
such a way that narrow zigzag
stitches will be sewn on extended
edge° The wide zigzag stitch should
just catch the fold of the garment,
(Fig. 3)
Right Side of
Finished Hem
Edge
Fig, 2
2. Fold garment away from hem leav-
ing I/8" of hem edge extending,
( Fig, 2)
Fig, 4
4. Press both sides of the finished hem,
The right side of the garment wilt
show only the blind stitches, (Fig, 4)
24
To Next Page
Loading...
