Cnecu<ung __, 0_ °0,,o_nceProbSems WHAT TO DO
..... CORR ECTION
Choose correct_siZe needle for:thread and fabric,
Rethread machine,
Tighten upper thread tension.: _
DO not pull fabriC; guidel]t gently.
tnCrease pressure on presser f0ot_
ReSet presser foot:i-
Rewind bobbin.:: i:
Replacelneedle plate, or polish off burrs completely.
Do not pull fabric; guide it gently.
Choose correct Size needle for thread and fabric.
Reset needle_
Reset presser foot.
When Starting a seam be Sure to draw both threads under and
back of presser foot about 4" and hold until a few stitches
are formed.
Reset thread tensions (s).
Increase pressure on presser foot.
Upper thread and bobbin thread should be Same size
and kind.; .....
Insert new needle.
Reset presser f0ot,
Use underlay of tissue paper.
4_
To Next Page
Loading...
