4_
bO
:iChooselCOfre_i_size:needre_:
i nsertln_wneed!e. : :::
Reset needle. :i: i
Loosen upper th[ead tension.
Increase pressui:e: on P_;esser foot.
Start :to stitch at a :medium speed.
Rethread machine.
Lo0sen upper thread tension.
Choose correct size needle for thread and fabric.
Insert new needle. ..... : : :
Replace needle plate; or polish off burrs:completely.
Check bobbin threading,
Clean bobbin and Shuttle.
Remove darning plate.
Increase pressure on presser foot.
Place both threads back under presser foot before
beginning to stitch.
Push in the clutch.
Disassemble and clean shuttle.
To Next Page
Loading...
