Z_PPER APPLICATION
SETTINGS
Stitch Selector .........
Stitch Length Control .... 12
Stitch Width Control ...... 0
Top Thread Tension
Control .............. 3 to 6
Zipper Foot
Needle entry
(right)
1
Fig, 3
REGULAR ZIPPER
Pin or baste zipper to fabric and place the
work in position under the presser foot,
Loosen the zipper foot adjusting screw
to set the foot on the left side of the
needle, and sew the left side zipper as
shown. (Fig. 1) To sew the rightside
zipper, loosen the screw and bring the
foot to the right side of the needle,
INVISIBLE ZIPPER
Adjust the foot so the needle is sewing
through the center hole of the foot and
one groove of the foot is riding on the
teeth of the zipper. See Fig, 2. Follow
the zipper manufacturer's instructions,
After zipper has been inserted, finish
sewing seam by shifting foot to side
position sewing through side notch,
CORDING
Foot can also be used to make cording
for slipcovers etc. Cover a cord with a
strip of bias fabric and sew as shown in
Fig. 3.
NOTE :
Use "Low Bar Sewing Machine ZIP-
PER FOOT" (6757) for "invisible zipper"
and "cording", which can be obtained at
any stores of Sears Roebuck and Co.
29
To Next Page
Loading...
