Kenmore 385.162213 - F: Satin Stitch Foot; C: Overedge Foot; B: Buttonhole Foot (Option); Quilter

Presser Foot Types (continued)
oSatin stitch foot (Foot F)
Use this foot for satin stitch and outlining applique,,
For: Darning (page 46)
Satin stitch (page 48)
Monograming (page 50)
Applique (page 50)
Shell stitch (page 60)
Decorative stitch patterns (page 62)
Twin needle stitches (page 64)
Smocking (page 68)
f
Foot F:
Prensatelas F:
Pied F:
J
o Overedge foot (Foot C)
This foot is specially constructed for stitching and/or
overcasting seams, The small brush and wire guides help
control the fabric, hold the raw edge in place and keep it
from puckering, especially when sewing on knit fabrics.
For: Overcasting (Page 54)
Serging (Page 70)
° Buttonhole foot (B) (Option)
Use this foot for manual buttonholing,
It is marked to help you measure your buttonholes
accurately,
For: Manual buttonhole (page 82)
• Quilter
The quilter helps keep the stitching lines straight
For: Quilting (page 40)
f
Foot C: %
Prensatelas C:
Pied C
Foot B:
PiedPrensatelasBB:
Quilter:
Acolchador:
Guide & matelasser:
J
J
14