Kenmore 385.162213 - Bobbin Winding; Horizontal Spool Pin; Additional Spool Pin

Bobbin Winding
oHorizontal spool pin
(_ Spool pin
(_) Large spool holder
(_) Small spool holder
Lift up the spool pin (_ Place a spool of thread on the
spool pin with the thread coming off the spool as shown_
Attach the large spool holder (_), and press it firmly
against the spool of thread
The small spool holder (_)is used with narrow or small
spools of thread.
oAdditional spool pin
(_ Additional spool pin
(_) Spool pin hole
(_ Spool pin felt
The additional spool pin (_ is for bobbin winding, without
unthreading the machine, and for twin needle sewing,
Insert the additional spool pin(_ into the hole _),
Place the felt (_)and a spool on the pin
f
J
J
2O