Kenwood CS-5200 Series - Page 47

1 cycle = 40 /TS (5 /-IS/divx 8 div)
Example : In the case of Figure 17, the frequency is found as shown below, provided the
period is 40 /«.
Freqyency = - = 25X 10
3
= 25 kHz
40X10-"
• Cursor measurement [CS-5230, 5260, 5270]
(1) Display the waveform to be measured in an easy-to-see position.
(2) Press the CURSOR MODE switch to select the time and frequency mode. Bring the AREF
and A cursors in contact with the points to be measured. Read the measurement.
Measured value
Figure 17-2 Measuring Frequency (Cursor measurement)
Figure 17-1 Measuring Frequency
43