Kenwood CS-5200 Series - Features

3. FEATURES
4
High Sensitivity : Sensitivity up to 1 mV/div.
fide Bands : The frequency range is DC to 20 MHz (-3 dB) at
1 fflV and, 2 mV/div range and DC to 100 MHz [DC to
40 MHz for the CS-5230 or CS-5235, DC to 60 MHz for
the CS-5260 or CS-5265] (-3 dB) for 5 mV/div.
HDTV : A specially designed HDTV signal triggering circuit
offers stable and adjustment-free synchronization with
the FRAME and LINE signals from smal1 to large
amplitudes.
Ease of operation : The osci1loscope does not use multi-function knobs.
Thus, an inexperienced person may use it easily.
Straightfoward switch layout on the panel eliminates
errors even for complicated operations.
Three-channel vertical axis : Trigger signals may be measured on CH3 without using
the trigger view function.
Stepless sensitivity control : The vertical axis sensitivity may be changed from 1
mV/div to 5 V/div continuously with a rotary switch.
High Speed Sweep : High speed sweeping is possible at a time base of 5
ns/div (during x10 MAG operation)
[10 ns/div for the CS-5230 or CS-5235],
High Accuracy :Accuracy is within 3% for both vertical ax i s
sensitivity and sweep time.
Fixed Synchronization : The fixed synchronization function eliminates trouble-
some synchronization.
One Touch X-Y : Switching to X-Y operation is via a single switch.
Automatic Trigger Signal Selection : Trigger signal can be selected automatically according
to the VERT MODE control sett ing by switching the
SOURCE control to VERT.
CHI OUTPUT : A channel 1 output terminal* is added for CHI input
signal monitoring.
High Stability, High Reliability : Hybrid integrated circuits are employed in al 1
circuits, realizing high standards in stabi1ity and
reliability.
Scale Illumination : The scale illumination function makes it possible to
take photographs of waveform data displayed on the CRT
in a dark room.