C
Cynthia PerezAug 31, 2025
What does 'NO DISC' mean on my Kenwood KDC-BT565U?
- JJessica MccoyAug 31, 2025
If your Kenwood Car Receiver displays 'NO DISC', insert a playable disc into the loading slot.
To Next PageTo Next PageWhat does 'NO DISC' mean on my Kenwood KDC-BT565U?
If your Kenwood Car Receiver displays 'NO DISC', insert a playable disc into the loading slot.
What does 'SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.' mean on my Kenwood KDC-BT565U Car Receiver?
If your Kenwood Car Receiver displays 'SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.', your subscription is updated. Press the volume knob to continue.
Why does 'LOADING' appear when entering search mode on my Kenwood Car Receiver?
If 'LOADING' appears on your Kenwood Car Receiver when you enter search mode, the unit is still preparing the iPod/iPhone music list. It may take some time to load, so try again later.
What does 'SCAN CANCEL' mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays 'SCAN CANCEL', TuneScan has been aborted.
What does 'NO CONTENT' mean on my Kenwood KDC-BT565U?
If your Kenwood Car Receiver displays 'NO CONTENT', there is insufficient content to start TuneScan.
Why can't I playback at BROWSE MODE on my Kenwood KDC-BT565U Car Receiver?
If you cannot playback in BROWSE MODE on your Kenwood Car Receiver, make sure the KENWOOD MUSIC PLAY APP is installed on the Android device. Reconnect the Android device and select the appropriate control mode.
What does 'NO SIGNAL' mean on my Kenwood KDC-BT565U?
If your Kenwood Car Receiver displays the message 'NO SIGNAL', ensure that the antenna is mounted outside the vehicle.
What to do if my Kenwood KDC-BT565U says 'CHECK ANTENNA'?
If your Kenwood Car Receiver displays the message 'CHECK ANTENNA', check that the antenna and its connection are in good condition.
What to do if my Kenwood KDC-BT565U says 'READING keeps flashing'?
If your Kenwood Car Receiver displays 'READING' and it keeps flashing, avoid using too many hierarchical levels or folders.
Why is radio reception poor on my Kenwood Car Receiver?
If the radio reception on your Kenwood Car Receiver is poor, make sure the antenna is firmly connected.
General| Type | Car Receiver |
|---|---|
| DIN Size | Single DIN |
| Brand | Kenwood |
| Model | KDC-BT565U |
| Bluetooth | Yes |
| USB Input | Yes |
| AUX Input | Yes |
| CD Player | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| WAV Playback | Yes |
| AAC Playback | Yes |
| FLAC Playback | Yes |
| Maximum Power Output | 50W x 4 |
| RMS Power Output | 22W x 4 |
| Subwoofer Control | Yes |
| Display Type | LCD |
| Remote Control | Yes |
| Android Music Playback | Yes |
| iPhone/iPod Music Playback | Yes |
| Pandora Control | Yes |
| Spotify Control | Yes |
| HD Radio | No |
| SiriusXM Ready | No |
| AM/FM Tuner | Yes |
| Built-in Microphone | Yes |
| Steering Wheel Control | Yes |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| Display Color | Variable Color |
Important safety warnings, cautions, and general advice before operating the unit.
Guides through setting the display language, clock, date, and initial system preferences.
Instructions for searching stations, direct access tuning, and radio settings.
How to play media from CDs, USB devices, iPod, and Android phones.
Guide to preparing, activating, and listening to SiriusXM satellite radio.
Steps for pairing Bluetooth devices for the first time and enabling auto-pairing.
Instructions for answering, rejecting, ending calls, and managing call quality.
How to stream audio from Bluetooth devices and control playback.
