ENGLISH
11
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
PRESET EQ DRIVE EQ
/
TOP40
/
POWERFUL
/
ROCK
/
POPS
/
EASY
/
JAZZ
/
NATURAL
/
USER
:Selects a preset equalizer suitable to the music genre. (Select [
USER
] to use
the customized settings.)
[
DRIVE EQ
]
is a preset equalizer that reduces noise outside the car or running
noise of the tyres.
BASS BOOST LV1
/
LV2
/
LV3
:Selects your preferred bass boost level.;
OFF
:Cancels.
LOUDNESS LV1
/
LV2
:Selects your preferred low and high frequencies boost to produce a
well-balanced sound at a low volume level.;
OFF
:Cancels.
SUBWOOFER SET ON
:Turns on the subwoofer output.;
OFF
:Cancels.
LPF SUBWOOFER THROUGH
:All signals are sent to the subwoofer.;
85HZ
/
120HZ
/
160HZ
:Audio
signals with frequencies lower than 85Hz/ 120Hz/ 160Hz are sent to the
subwoofer.
SUB-W PHASE REVERSE
(180°)/
NORMAL
(0°):Selects the phase of the subwoofer output to be
in line with the speaker output for optimum performance. (Selectable only if a
setting other than [
THROUGH
] is selected for [
LPF SUBWOOFER
].)
FADER R15
to
F15
(
0
):Adjusts the rear and front speaker output balance.
BALANCE L15
to
R15
(
0
):Adjusts the left and right speaker output balance.
VOLUME OFFSET
For AUX:
–8
to
+8
(
0
) ; For other sources:
–8
to
0
:Presets the volume adjustment
level of each source. (Before adjustment, select the source you want to adjust.)
SOUND RECNSTR
(Sound
reconstruction)
ON
:Creates realistic sound by compensating the high-frequency components and
restoring the rise-time of the waveform that are lost in audio data compression.;
OFF
:Cancels.
• [
SUB-W LEVEL
]/ [
SUBWOOFER SET
]/ [
LPF SUBWOOFER
]/ [
SUB-W PHASE
] is selectable only
if [
SWITCH PREOUT
] is set to [
SUB-W
]. (
4
)
• [
SUB-W LEVEL
]/ [
LPF SUBWOOFER
]/ [
SUB-W PHASE
] is selectable only if
[
SUBWOOFER SET
] is set to [
ON
].
DISPLAY SETTINGS
1 Press the volume knob to enter [
FUNCTION
].
2 Turn the volume knob to select [
DISPLAY
], then press the
knob.
3 Turn the volume knob to make a selection (see the following
table), then press the knob.
4 Repeat step 3 until the desired item is selected/activated.
5 Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
DIMMER ON
:Dims the display illumination.;
OFF
:Cancels.
BRIGHTNESS 0
—
31
: Selects your preferred brightness level for display
illumination.
TEXT SCROLL AUTO
/
ONCE
:Selects whether to scroll the display information
automatically, or scroll only once.;
OFF
:Cancels.
JS_KWD_KMM_U21_MN_EN_1.indd 11JS_KWD_KMM_U21_MN_EN_1.indd 11 31/7/2014 2:49:03 PM31/7/2014 2:49:03 PM
To Next Page
