Kenwood NX-5200 Service Manual

(No.RA018<Rev.002>)1-55
18.
Battery
Warning
Level
writing
1) Adj item:
[BATT]
Adjust:[***]
PTT: ON
1) Adj item:
[Battery Warning
Level]
Press [Transmit]
button.
Power
meter
DVM
Panel ANT
BATT
termi-
nal
Press the PTT switch or
[Transmit] button on the
PC window. Apply 6.20V
to battery terminal. Con-
firm that one pre-deter-
mined numeric in the
range 1 to 256 appears.
[Panel tuning mode]
Press [ ] key to store
the adjustment value.
[PC test mode]
Press [Apply] button to
store the adjustment val-
ue.
19.
Battery
Warning
Level
check
[Panel test mode]
1) CH-Sig: 1-1
BATT terminal
voltage: 6.0V
while transmitting
1)Test Channel
Channel: 1
Test Signaling
Mode: Analog
Signaling: 1
BATT terminal volt-
age: 6.0V while
transmitting
Check The transceiv-
er can transmit
with causing
the LED to
blink.
Item Condition Measurement Adjustment Specifica-
tions
/Remarks
Panel tuning
mode
PC test mode Test-
equip-
ment
Unit Ter-
minal
Unit Parts Method

Kenwood NX-5200 Specifications

General

IP Rating	IP67
Zones	128
GPS	Yes
Bluetooth	Yes
Voltage Range	7.5V DC ±20%
Operating Temperature	-30°C to +60°C
Frequency Range	136-174 MHz
Battery Life	14 hours (Digital mode)
Digital Protocol	NXDN, DMR
Display	LCD