Need help?Do you have a question about the Kenwood RV-7000 and is the answer not in the manual?
General| 3D | Yes |
|---|---|
| Analog signal format system | NTSC, PAL |
| Receiver type | Surround |
| RMS rated power | 150 W |
| Audio output channels | 5.0 channels |
| Total Harmonic Distortion (THD) | 0.01 % |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| AirPlay | No |
| Display | - |
| Product color | Black |
| Audio decoders | Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS Neo:6, DTS-HD |
| Volume control | Rotary |
| Apple docking compatibility | Not supported |
| Supported radio bands | AM, FM |
| Dimensions (WxDxH) | 430 x 384 x 159 mm |
| HDMI ports quantity | 5 |
| HDMI in | 4 |
| Digital audio coaxial in | 1 |
| Digital audio optical in | 2 |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 200 W |
| Connectivity technology | Wired |
| Speakers connectivity type | Clamp terminals |
Weight and Dimensions| Weight | 900 g |
|---|
To Next Page
