ES749 Flow Computer
36
The Flow Equation sets the basic functionality of the unit. Choose the
Flow Equation for your particular application.
Note:
Various setup data is only available depending on the ow
equation selected. The ow equation also determines the
assignment of the inputs.
Caution:
Select the ow equation as the rst step. We recommend
using the EZ Setup to select the proper ow equation. The
user can then enter the submenu groups and make additional
changes as desired.
Selection:
GAS COMBUSTION HEAT, GAS MASS, GAS CORRECTED
VOLUME, STEAM DELTA HEAT, STEAM NET HEAT,
STEAM HEAT, STEAM MASS, LIQUID DELTA HEAT, LIQUID
SENSIBLE HEAT, LIQ. COMBUSTION HEAT, LIQUID MASS,
LIQ. CORRECTED VOLUME, STM – CONDENSATE HEAT
Display: STEAM MASS
FLOW EQUATIONS
Enter the date in this format: Day - Month - Year.
Note:
After prolonged breaks in the power supply (several days)
or upon initial start-up of the unit, the date and time must
be reset. This does not apply to units with the datalogger or
language option.
Input:
Flashing selections can be changed.
Store and Conrm entries with the ENTER key
Display: 08 FEB 1996
ENTER DATE
The "Daylight Savings" mode allows the unit to automatically adjust
the time according to daylight savings time change
Note:
Select "Yes" to enable the Daylight Savings Mode
Selection:
Yes, No
Display: Yes
DAYLIGHT SAVINGS
SYSTEM PARAMETERS
6.4
SYSTEM
PARAMETERS
(Continued)
FLOW EQUATION
ENTER DATE
DAYLIGHT SAVINGS
TIME
To Next Page
Loading...