KEP ES749 - 6.4 SYSTEM PARAMETERS

ES749 Flow Computer
35
6.4
SYSTEM
PARAMETERS
SYSTEM PARAMETERS
The EZ Setup routine is a quick and easy way to
congure the most commonly used instrument functions.
Reference:
Refer to Section 6.2 for EZ Setup Programming.
Caution:
Entering the EZ Setup mode automatically sets
many features to default values without informing
the user. This may cause any previously
programmed information to be lost or reset
Selection:
YES, NO
Display: EZ SETUP? NO
PAUSE COMPUTATIONS
Note:
The "Pause Computations" warning message
informs the user that all computations are halted
while programming EZ Setup.
This is the menu location where the operator can unlock
the unit by entering the correct password (operator
or supervisor code), or lock the unit by entering the
incorrect password.
Selection:
0 - 9999
Display: 0
ACCESS CODE
EZ SETUP
ACCESS CODE