KEP ES749 - Service & Analysis

ES749 Flow Computer
86
Two counters contain the number of times the calibration and/or
conguration parameters have been changed. Changes in important
calibration and conguration data are registered and displayed
("electronic stamping"). These counters advance automatically.
These counters cannot be reset so that unauthorized changes can
be identied.
Example:
CAL 015 CFG 076
Display: CAL 015 CFG 076
EXAMINE AUDIT TRAIL
A list of errors that have occurred can be viewed and cleared.
Selection:
VIEW? NO
VIEW? YES
If "YES" is selected the error log can be viewed and errors
individually cleared (if editing enabled with Service Code).
Display: CLEAR? NO
POWER FAILURE
Display the software version of the ow computer. (Contact local
agent for upgrade information)
Example:
02.00.14
Display: 02.00.14
SOFTWARE VERSION
Display the hardware version of the ow computer. (Contact local
agent for upgrade information)
Example:
01.00.01
Display: 01.00.01
HARDWARE VERSION
EXAMINE AUDIT
TRAIL
ERROR LOG
SOFTWARE
VERSION
HARDWARE
VERSION
SERVICE & ANALYSIS
6.15
SERVICE &
ANALYSIS