KERN CFS 300-3 - Display Weight; Display Average Piece Weight; Display Quantity

14 CFS/CCS-BA-e-1624
2.4.1 Display weight
Here the weight of your goods is displayed in [kg].
Indicator [

] atop the symbol shows:
Storage battery status display
NET
Net weight
Stability state indication
Model
CFS 50K-3
a
Zeroing display
lb/kg
Current weighing unit
2.4.2 Display average piece weight
Here the average reference weight of a sample is displayed in [g]. This value is
either numerically entered by user or calculated by weighing on balance.
Indicator [

] atop the symbol shows:
Number of parts placed on balance
too small
Piece below minimum weight of
piece
M+
Data in summation memory
1 2
Active balance:
1. Reference balance KERN CFS
2. Bulk scales e.g. KERN KFP
2.4.3 Display quantity
Here the current piece quantity (PCS = pieces) or in totalizing mode the sum
Sum of the placed parts is displayed, see chapter 10
Indicator [

] atop the symbol shows:
Tolerance control in counting mode
Tolerance control in weighing mode
+
Goods to be weighed above tolerance limit
TOL
Goods to be weighed within tolerance range
-
Goods to be weighed below tolerance limit